Google Maps can still determine your location even when GPS is disabled by using a combination of other technologies such as Wi-Fi and cell tower signals. When GPS is turned off, Google Maps can use Wi-Fi signals from nearby routers and information from cell towers to approximate your location. This is known as "Wi-Fi positioning" or "cell tower triangulation," and it allows Google Maps to provide an estimated location based on the available signals in the area. However, this method may not be as accurate as GPS, but it can still give a general idea of your location. **

To sew leather edge to edge, you will need a leather needle, heavy-duty thread, and a leather sewing machine or a heavy-duty sewing machine with a leather sewing foot. First, align the edges of the leather pieces and secure them in place with clips or pins. Then, use a leather sewing machine or a heavy-duty sewing machine with a leather sewing foot to sew the edges together using a straight stitch. Make sure to use a longer stitch length and go slowly to ensure even stitching. Finally, backstitch at the beginning and end of the seam to secure the stitches. **

The dimmer used can vary depending on the type of lighting fixture being controlled. Leading edge dimmers are typically used with incandescent and halogen bulbs, while trailing edge dimmers are more commonly used with LED and CFL bulbs. It is important to match the dimmer type with the appropriate lighting technology to ensure optimal performance and compatibility. **

To apply edge banding to a surface, you will need to first cut the edge banding to the desired length and width of the surface you are covering. Next, use a hot iron or edge banding machine to apply heat to the edge banding and press it firmly onto the surface. Use a roller or edge banding trimmer to ensure the edge banding is securely attached and trim any excess material. Finally, allow the edge banding to cool and set before using the surface. **

Trailing-edge dimmers are typically used for LED and electronic low-voltage lighting, as they provide a smoother dimming experience and help prevent flickering. On the other hand, leading-edge dimmers are more commonly used for incandescent and halogen lighting. The choice between leading-edge and trailing-edge dimmers depends on the type of lighting being used and the desired dimming performance. **

As an AI language model, I don't have the capability to draw routes on maps, including Google Maps. However, you can easily draw routes on Google Maps by using the "Directions" feature, which allows you to input your starting point and destination to generate a route. Additionally, you can use the "My Maps" feature on Google Maps to create custom maps with routes and points of interest. **

Yes, the location is GPS. GPS, or Global Positioning System, is a satellite-based navigation system that provides location and time information anywhere on or near the Earth where there is an unobstructed line of sight to four or more GPS satellites. This allows for accurate and precise location tracking and mapping. **

Yes, you can save the location information in the Imaging Edge Mobile app as a location name. When you use the app to transfer photos from your camera to your mobile device, the app can automatically add the location information to the photos. You can then save this location information as a location name within the app, making it easier to organize and search for your photos based on where they were taken. This feature can be especially useful for photographers who want to keep track of the specific locations where their photos were captured. **